Home / Products / Caliber Ultra HT Grease

Caliber Ultra HT Grease

ULTRA HIGH TEMPERATURE MOLY GREASE

DESCRIPTION:

Caliber Ultra HT Grease is a non-melt, non-drip type high temperature grease containing molybdenum disulfide micronised solid lubricants and a blend of additives to aid performance of bearing lubrication at high temperatures. Increase resistance to oxidation and rust and also impart load carrying properties.

 
APPLICATIONS

Caliber Ultra HT Grease is designed for lubrication of anti-friction and journal bearings operating under severe conditions.

  1. Bearings in soot blowers.
  2. Hot running bearings in axle boxes and kiln cars.
  3. Hot strip mills on cold conveyors.
  4. Paper Mills.
  5. Pre heater fans.
  6. Electrical motor bearings.
  7. Oven-fans.
  8. Textile Stentors.
  9. Over head conveyors.
  10. Oven Conveyors.
  11. Pharmaceutical units.
  12. Cosmetic plants.
  13. Latex manufacturing plants.
  14. Food processing machinery.
  15. Bakeries.

 
BENEFITS

Because of its greater adhesion on metal surface under any operating conditions it maintains a thin adhesive lubricating film and thereby reduce wear & friction. This grease has no definite melting point (above 250oC) & because of its infusible nature can be used for high temperature bearing lubrication successfully between the operating temperature ranges of -20oC to 250oC. The MoS2 film has sustenance to loadings higher and coefficient of friction around three to four times lower then other grease. It decreasing wear life & also increasing relubrication period.

 
HOW TO APPLY

By normal greasing methods, Caliber HT Grease can be applied by hand or dispensed through grease guns or automatic dispensing equipments as centralized lubrication systems. Pack bearing as per manufacturer's instructions. Clean surface dry from old grease or residue throughly before use of this grease. Do not mix with conventional greases.

 

SPECIFICATIONS

Tests Specifications
Appearance Smooth
Colour Black
Base (Thickner) Calcium Sulphonate Complex
Solid Lubricant Proprietary Blend
Base Oil Mineral
Base Oil Velosity (ASTM D-445) 420-460 cts
NLGI Grade #2
Worked Penetration (ASTM D-217) 265-295 (0.1 mm)
Dropping Point (ASTM D-2265) ≥ 300 oC
Four ball Weld load (ASTM D-2596) 400 Kg
Four ball Weld Scar (ASTM D-2266) 0.5 mm