Home / Products / Caliber Molyspray

Caliber Molyspray

DRY FILM LUBRICANT

DESCRIPTION:

Caliber Molyspray consist of a high percentage of micro-fine MoS2 suspended in a quick drying vehicle. Based on a combination of solid film lubricant. Molybdenum disulfide is a solid film lubricant with a co-efficient of friction. Under sliding pressure, it bonds to metal surfaces to form a film that reduces high points and friction between two sliding or mating areas.

 
APPLICATIONS

Caliber Molyspray can be used wherever a dry film lubricant free from oil and grease is desired : Useful as a dry film lubricant for working in dirty and dusty environments as in:

  1. Textile stenter machines.
  2. Cement plants.
  3. Mining and construction sites.
  4. Earth moving equipments.
  5. Oil and gas refining.
  6. Moving parts.
  7. Toggle joints.
  8. Linkages.
  9. Pivot-pins.
  10. Adjustment bolts.
  11. Small gears.
  12. Press-fits.
  13. Bushings.
  14. Shafts.
  15. Piston rods.
  16. Rings.
  17. Open chains & rollers.
Useful as a thread lubricant for all threaded connections of:
  1. Nuts and bolts.
  2. Studs and flanges.
  3. Boilers.
  4. Flanges.
  5. Valve stems.
  6. Manifolds.
  7. Compressors.
  8. Cylinder heads.
Useful as a high temperature anti-seize lubricant for mating surfaces and threaded connections of :
  1. Reactors.
  2. Steam turbines.
  3. Boilers.
  4. Furnaces.
  5. Auto Claves.
  6. Jet engines.
  7. Cylinder heads.
  8. Cat-crackers.
  9. Heat exchanger.
  10. Internal combustion engines.
Useful as an extreme pressure, anti wear lubricant for:
  1. Guides.
  2. Lathe beds.
  3. Gaskets.
  4. Packings.
  5. Ways.
  6. Jigs and fixtures.
  7. Splines.

 
BENEFITS

Air drying film providing clean and dry lubrication to equipment operating under dirt and dust, abrasive or severe conditions. Provides long term, oil and grease free lubrication and does not attract dirt and dust.

  1. Withstands high loads and heavy pressure upto +200,000 psi & does not get squeezed out, dislodge or blow away.
  2. Eliminates metal to metal contact between sliding surfaces and prolongs equipments wear life.
  3. Aerosol formulation ensures lubrication of hard to reach areas and provides maximum lubrication with minimum wastage.
  4. Withstands extreme temperatures from -180oC to 450oC in air and upto +1100oC in absence of air as in tight fit assemblies.
  5. Forms an anti-seize film between threaded surfaces and enables problem free dismantling.

 
HOW TO APPLY

Shake well before use till bearing sound form inside is audible for atleast 2 minutes. Clean and degrease surface completely before application. Spray uniformly onto surface. Allow solvent to evaporate before assembly.

 

SPECIFICATIONS

Tests Specifications
Type Solid lubircants in binder and solvent
Appearance - as supplied Thin Liquid
Appearance - on curing Dry paint type liquid
Colour Gray Black
Odor Mild Solvent
Flash Point (aerosol) -18 oC (<0 oC)
Density g/cc > 1.0
Service temperature range, oC -180 to +450 (upto +630 in areas with restricted air access)
Curing Point Air dries to touch in 1 minute at room temperature and completely in 5 minutes
Recomended film thickness, μm 5-15
Special Properties Excellent adhesion on all types of surfaces
Propellent Non CFC